Treble clef pendant made of beads. How to weave a keychain from beads: step-by-step instructions

Beads are a truly unique material for creativity. You can use it to make a simple bauble or stunning interior items. And if you approach the creation of beaded crafts with your soul, and even apply a little imagination, you can create an exclusive item that will delight the eye and warm the soul. And you can decorate not only yourself, but also your favorite phone, keys, handbag.

So, let's talk about keychains. Of course, you can just buy them... But the purchased items will not be unique, no matter how much they cost. This is the secret of the popularity of hand-made accessories. Handmade beaded keychains will cost you pennies, but they will bring you much more joy than factory stamped ones.

How to make an “Orange Slice” keychain from beads with your own hands

The master class presented below is quite simple, and detailed descriptions and photos will help even a novice craftswoman cope with this task. So, step one is to prepare the material necessary for the work.

What do you need to weave a keychain?

Beads in dark orange, white and light orange colors

Monofilament (this is a cross between regular thread and the finest fishing line; can be purchased at craft stores)

Bead needle (very, very thin so that the beads can easily slip through the eye; also sold in handicraft shops)

A cotton pad or piece of cotton wool as a “filler” for the keychain

Small metal ring and cord pendant (worth looking for in hardware stores)

Now you can start creating a beaded keychain with your own hands.

Weaving pattern for the first three rows

Cut about a meter of monofilament thread and string six white beads onto it. Pass a needle with a thread threaded through it into the first of the strung beads along the weaving path so that you get a ring.

Then comes the turn of light orange beads. The second row is woven like this: string one bead, thread the needle through the second white bead in the “ring,” string another orange one, thread the needle through the third bead in the “ring” - and so on. This row should consist of seven beads.

In the third row there will again be white beads. They should be woven between the light orange ones according to the pattern of the second row.

Weaving pattern for all other rows

On the fourth row the number of beads increases: instead of seven there are fourteen. The weaving pattern remains the same as in the second and third rows, but the beads need to be woven two at a time.

The next stripe alternates white and orange beads. They are woven again one at a time according to this principle: the orange ones are attached to the orange ones, and the white ones, accordingly, need to be woven over the white ones.

In the next row, the principle of weaving beads one at a time is maintained. Only orange beads are used. They should be attached strictly above those of the same color.

The next four stripes are woven in the same way as the previous three pieces. Next are a couple of rows of white beads without additions or omissions.

After this, dark orange beads come into play. The first dark row must be woven, making additions on every third bead, that is, according to scheme 1 - 1-2. The next two stripes are made without additives. The result should look something like this.

The final row needs to be woven from only one side, folding the orange slice in half before weaving. When the last row is woven, you should cut the cotton pad to a size slightly smaller than the product and put it inside the slice.

The edges of the fabric need to be sewn with a brick stitch. The final touch is to attach a loop. Its place is in the corner of the slice where the weaving ended. Important: before attaching the loop, you should thread the prepared fittings into it, that is, a ring and a ribbon that will help attach the keychain to your phone or handbag.

That's all for the question “how to make an orange slice keychain from beads with your own hands.” The product is ready, you can attach it wherever your heart desires - and enjoy the unique accessory.

This kind of keychain can be not only “orange”, but also slices of other fruits. To get, for example, a slice of apple or watermelon, you just need to change the design - the pattern remains the same.

How to make simple bead keychains with your own hands

Bee

The simplest bead charms, which you can easily and quickly make with your own hands, are made with transverse or honeycomb weaving. For example, you can consider a scheme for creating a funny striped bee.

She looks like this:

The product must be completed moving according to the pattern from bottom to top.

There is only one bead in the initial row. It needs to be threaded through a special wire (can be bought at craft stores) and placed in the middle. After this, thread the wire again in a different direction.

From the third to the sixth row you need to weave according to the pattern, not forgetting to monitor the ideal tension of the thread or wire so that the product does not sag or hunch.

On the seventh row, bee wings are made. This is done like this: eight black beads are strung on each end of the wire, and a ring is made from them (the wire is threaded through the first one).

These kinds of schemes are uniquely simple. They are great for getting people interested in beadwork. After all, having finished the “bee”, you can create many more funny figures using similar patterns.

And even if the first beaded keychains you make yourself will be slightly crooked, and with mistakes here and there, this is not too important. Because mastery in any business comes with experience. And if a novice craftswoman really wants to, she can create unique things from beads.

Beads are an unusual material for creativity. From it you can create a light bauble, a badge and keychains, and magnificent interior items. And if you approach the making of beaded crafts with all seriousness, and even apply a little imagination, you can make a real exclusive that will delight the eyes and warm the soul. And you can decorate not only yourself, but also your cute phone, keys, bag with such a product. The pendant can be an asterisk, or ladybug and even a fox.

So, now we will look at the topic of keychains. Of course, it’s easier to just buy them than to make them. But purchased products will never be unique. This is the secret of the popularity of hand-made things. Handmade beaded keychains will cost you pennies, but will bring you twice as much joy as a simple stamped item from a factory.

Now we will analyze the master class, which is quite simple, but full description and tips will help even a novice needlewoman cope with creating a keychain. So, the first stage is to prepare the material necessary for the work.

What we need to weave a keychain:

Now let's move on to creating a keychain from beads with your own hands. Description of the work process:

Weaving pattern of the first rows.

Let's cut about a meter of monofilament thread and put 6 white beads on it. Let's pass a needle with a thread threaded through it. Into the first of the beads made along the weaving path so that a ring is formed.
Then comes the turn of the light orange material. The second row is done like this: we string one bead, thread a needle through the second white bead in the “ring,” thread another orange one, thread the needle into the third bead in the “ring,” and so on. This row should consist of 7 beads.
In the third row there will again be white beads. They need to be woven between the light orange ones according to our second row pattern.

Weaving pattern for other rows.

Gallery: beaded keychain (25 photos)

Bead key

How to create a key fob? Everything is quite easy if you already understand what will decorate your keychain. For example, it could be a flower, a tote bag, a beaded bow, an orange slice, a ball, a snake. Ending your choice can help you detailed instructions creation starfish from beads of different colors:

We'll put five beads on the fishing line and close the ring.
Let's add beads through one, and at the end we will thread the needle through two beads. You should approximately have a star.
We create the third row using the same principle, but we already string two beads.
Let's make the rays of a star! We attach 2 beads one by one, then another one, and so on until the circle is closed.
In the fifth row, where the rays are, there will be two beads, and between them - one after another.
We repeat all the work according to the scheme, lengthening the rays (up to six pairs of beads) and adding peas between them.
In the final row in a circle, add one bead at a time, making the rays pointed.
We put the product on a metal chain with a ring.

How to create a machine from beads

To make such a toy from beads, you need to spend no more than an hour, this is the case if you have never done such crafts before. Regarding the choice of beads, first It’s better to take beads with right corners, square or rectangular, it’s easier to create a machine with them. Well, and most importantly, the scheme of work is similar to other previous ones, some still manage to make fruits from beads with their own hands, but they need to put in more effort.

Beads are an excellent material for various kinds of jewelry, baubles and many other creations. And if you show your imagination, you can create something exclusive that will not only please the eye, but also warm the soul, because this beauty was created with your own hands. Many of us love to decorate not only ourselves, but also household items, such as keys or cell phones. There are many models of these trinkets on sale. But such beauty sometimes costs a lot for a trinket, and there is a high probability that you will find the same one in someone else’s place, and all the joy from the purchase will disappear. Therefore, it is better to make your own beaded keychain; luckily, you will find the diagrams in this article.

How to make a keychain from beads “Orange slice”

Below is detailed master class on how to make a keychain from beads with your own hands using the example of the “Orange Slice” product. Detailed description and photos allow even a beginner to cope with this task. First, prepare the materials for work.

Material for creating a keychain

Beads of three colors: dark orange, light orange and white.
Monofilament. It is very similar to a thin fishing line, the thickness of an ordinary thread, but it is quite strong. Sold at any craft store.
Bead needle. It is much thinner than normal and easily passes through the beads.
A cotton pad, you will need it to fill the keychain.
Ring and cord for pendant.

Start weaving from rows 1 to 3

Cut a monofilament 1 m long and string 7 white beads onto it, then pass the needle and thread through the first bead, as shown in the figure. b.

Now take light orange beads. It needs to be woven between white beads, as in the picture V. There should be 7 beads.

Take 7 more white beads and pass them between the light orange ones in the same way as in the previous version.

Weaving subsequent rows

After the third row, you need to take two light orange beads for weaving, that is, there should now be 14 of them in a row. The weaving technique is the same.

For the next row, take one orange bead at a time and weave them between two beads of the same color, and weave the white beads over the white ones.

This row needs to be woven in the same way as the previous one. But take only orange beads and weave them over the same color.

In this row, again weave white beads over white ones, and take orange ones in pairs and weave them between beads of the same shade.

After this, take white beads and make 2 rows without increments.

Take dark orange beads and start weaving the 1st row in the following sequence: 1-1-2, then weave two more rows, but without additives.

Fold the orange slice in half and weave the final row on one side only. When this is done, put a cotton pad inside the product, having previously cut it so that it is slightly smaller than a slice.

Now sew the edges of the slice together as shown in the figure, using a brick stitch.

Now, in the corner of the keychain where you finished sewing the section, make a beaded loop, and before fastening it, thread it into the keychain fittings, then fasten it. That's all, the lesson on how to make a beaded keychain for a beginner is over. The orange slice is ready.

Such a keychain can be made not only in the shape of an orange, but also other fruits, for example like this:

Here are examples of beaded keychains of a different type:

Keychains can be hung not only on keys, they can decorate a wallet if it is locked, a mobile phone, a backpack or a bag, and such a product can also be hung in the car , For example, here's a cube:

And below you can find the most simple circuits for beginners.

Ladybug:

And a charming raccoon:

A selection of video lessons

How do you like the idea of making such a crocodile?

Or this watermelon:

And guitar:

We invite you to take up a fascinating activity – beadwork. You will need very little material, and thanks to your crafts you can transform the interior and create a Japanese corner with or place according to Feng Shui, decorate clothes, diversify accessories and even weave. In this article we will look in detail at how to make keychains from beads and patterns for weaving them.

How to weave a beaded keychain for beginners

There are a lot of bead weaving techniques; we will look at the “brick stitch” technique. This technique is used for weaving flat and three-dimensional figures and creates:

keychains;
- earrings -;
bracelets;
necklaces and pendants;

Here brick weaving pattern: the beads are stacked like bricks.

Second bricklaying method- This is a mosaic weave, the beads are woven vertically and not so twisted.

Flowers are especially successful with this technique: delicate or royal flowers, white.

When using the brick weaving technique, use fishing line or thread to match the beads. This will make the product look neater.

Patterns of keychains made of owl beads, made with brick stitch

These are patterns for weaving flat figures. They are done using the brick weaving technique.

Let's look at one scheme using a specific example and create a keychain from beads with our own hands using the “brick” technique.

Here is a diagram of the craft:

To create an owl keychain we need:

beads: white, black and gray;
fishing line;

needle;
beads (various 4 mm) – 7 pcs.

Let's get started:

We weave the second row.

From the third row we begin the expansion.

We weave the fourth row.

Let's move on to the fifth row.

In the seventh row we will reduce the number of beads.

In the eighth row cast 2 black, 9 white and close the row with 2 white.

In row 9 String 2 black, 8 white and end the row with 2 black.

In row 10 cast 2 black, 9 white and end the row with 2 black.

Starting from row 11, there is a decrease. You draw 2 black, 8 white and again 2 black.

In row 12 string 2 black, 7 white and close the row with 2 black.

In row 13 dial 2 black, 6 white and again 2 black.

We have woven the body of an owl, now Let's move on to weaving the head.

We continue the row by decreasing it and introducing a new color – gray. Select gray, 3 white, black, again 3 white and at the end of the row gray.

In the next row (this will be row 15) cast on gray, 3 white, 2 black, 3 white and 1 gray.

In row 16 string a gray one, 2 black ones, then 3 white ones and again 2 black ones, a white one and finally a gray one.

In row 17 dial like this: grey, white, black, white, black, 2 whites, black, white, black, white and grey.

Starting from row 18, we will reduce it. Type: grey, white, 2 black, white, grey, white, 2 black, white and grey, close the row.

In row 19 dial: gray, 3 white and 2 gray, 3 white and gray again.

In row 20 type grey, 2 white, 3 grey, 2 white and finish with grey.

In row 21 collect 8 beads gray.

In row 22 Let's start decorating the crown with single beads. To do this:

collect gray beads;
use a needle to hook the thread between the last two beads of the 21st row, go back through the bead you just cast on and tighten;
pull through the seventh bead and exit through the sixth in row 21;
braid 3 pcs. gray;
come out of the 2nd bead of the 21st row and weave in the gray one as described above.

In row 23 we weave 2 gray ones over three medium gray ones.

In row 24 we weave a gray bead in the center of two gray ones from the 23rd row.

Pick up a bead, followed by a bead. Go back through the bead and hide the thread in the weave.

Ready.

Using the brick weaving technique we will make a black cat bead keychain.

For it we will need:

beads of black color and contrasting with it for the eyes and mouth;

fishing line to do almost all the work;
wire for the tail.

Let's start doing the work according to the following scheme:

Start weaving from the middle of the head and from the longest row, moving first up and then down.

Having made the body, proceed to the tail. To do this, thread the wire between two beads and fold it in half. Place beads on both ends.

Secure the wire by making a turn around the last bead, and for reliability, pass the ends of the wire through several more beads of the tail and only then cut it off. The keychain is ready.

Here are the patterns for flat weaving cats with bricks.

Schemes for weaving beaded keychains in the shape of a dog are presented below.

We will weave the dog according to the following pattern:

We will need:

beads (black, white and brown) and wire.

We start weaving from the dog’s nose: weave a black one between two white beads.

To form the ears, you need to insert a separate piece of wire and weave small ears.

The tail is braided in one row, and it will not be rigid; it can be bent in any position.

After all the elements are ready, hide the pieces of wire by cutting off the excess. The dog is ready.

You can give a man a keychain made of beads, woven with his own hands, based on his hobbies. If he has a car, then this could be a keychain with a car logo or number.

If he plays musical instruments, then it could be like this:

If you are interested in football or basketball, here are the keychains:

Well, this could be a hobby:

Watch how to properly weave an owl using the brick weaving technique and do it along with the video.

Weaving a flat dog from beads for beginners. Step-by-step recommendations look in the video.

Don’t know what to give a man - a beaded heart keychain original gift. Learn to weave it with this video.

We have talked in detail about one of the beading techniques, all you have to do is stock up on material and start weaving. What did you do, write.

Many people prefer to have accessories that highlight their individuality. One option for such a detail is a keychain.

This is a universal thing that can adapt in style to any thing, be it a backpack, keys, or a wallet.

A trinket like a keychain can become a unique item if you make it yourself. A handmade keychain will be a pleasant gift for family and friends. This is one of the economical accessory options.

There are many suitable materials for making that can be found at home.

Materials for production

A handmade keychain is not just a thing, it is a kind of talisman and amulet that can bring good luck to those who really believe in it. Most of the materials can be found at home, among them will be:

paper:
beads;
threads;
textile;
ribbons;
plasticine;
rubber bands.

Suitable materials for making: straps, corks, buttons, leftover pencils. Fantasy will be your main assistant in your work. Thanks to her, you will get an unpredictable, long-awaited result.

Leather keychain for a backpack or handbag

This leather keychain will suit any style, from classic to sporty. It will be a successful addition to your preferred image.

To work you will need:

a small piece of leather;
threads;
fork;
needle;
glue;
ring for keychain.

The next stage is the manufacturing process:

A template is selected and the shape for the keychain is cut out.
Glue is applied to the previously cleaned surface of the leather to more reliably hold the material together.
A boundary is drawn along which the thread will then be threaded.
The holes are made using a sharp fork.
A ring is inserted and the product is stitched with thread.
The edges of the skin are cleaned.

The finished accessory can be attached to a bag or purse for decoration or to replace a runner.

Beaded keychain

Beaded accessories can be made in any colors, shapes and themes.

The most popular are animal figures, vegetables or fruits, flowers and hearts. However, doing this type of work will require certain skills.

To make a keychain you will need:

a set of beads of the desired colors;
fishing line;
scissors;
scheme for work;
ring for keychain.

The work diagram can be found on the Internet. For example, to make a keychain in the shape of a flower you need:

Cut the fishing line and bend it in half.
Place the beads on one end and push them to the middle. Pass the second end of the fishing line through it.
Place one more bead on the next row of beads. Repeat this with each row. The petal will turn out more interesting if you thread beads of a different color along the edges, starting from the 3-5th row.
Having reached the middle, reduce the number of beads in the row. The number of beads is optional.
For the core of the flower, take a large yellow bead.
Connect each element together, twist the fishing line and secure with a yellow bead.

The product can be attached to a bag or pencil case, which will serve as a decorative element.

Textile keychain

You can sew a keychain from small leftover fabric and present it as a nice gift to your friends. You just need to have basic knowledge.

To make a keychain in the shape of an owl you will need:

fabric (multi-colored);
lining;
leftover felt (for eyes, beak and paws);
pattern;
threads;
scissors;
needle;
buttons;
ring for keychain;
piece of lace.

Pay attention!

To make a keychain in the shape of an owl, you should first prepare a pattern and get to work.

First, the lining is connected to the fabric and processed. Afterwards, the details of the owl's body are revealed.
Now the front part of the owl is decorated. Felt circles are sewn in place of the eyes, buttons are sewn on top, and a beak is added.
Next, the front and back parts are connected manually or using sewing machine. In this case, you need to leave a small hole for the lace.
A ring is attached to the sewn cord. After which, the hole is sewn up.

Below are photos of keychains and their step-by-step production.